|
-
»
Channels
- Profiles, Mouldings, Special Shapes & Sections
- Angles, Angle Irons,
L-Shapes & V-Shapes
-
»
Specialty Tubing
-
»
Rings, Rims, Clamps, Flanges, Hoops & Bezels
- Holders, Mountings, Edgings, Trim, & Retainers
- Railings & Brackets
- Z-Bars, Purlins
-
»
Frames & Framing, Diffusers, Grills & Baffels
- Panels, Fins & Plates
-
»
Tracks, Ducts, Rails & Slides
- Caps, Covers, Cladding & Flashings
- Hinging: Louvers, Blades, Slats, Panels, & Beads
- Slats, Strips, Gaskets, Battens & Curved Tape
-
»
Bars & Sections: T, H, W & Double Channels
-
»
Wire Products: Strips, Straps & Rings
-
»
Other Products
- These Profiles Can Be Made Into:
- Stainless Steel Track Caps & Covers
- Shade Rollers
- Hem Bar, Bottom Bar & Hem-Line Channels
- Price Card Mouldings
- Towel Bars
- Curtain Rods
- Shower Rods
- Closet Rods, & Wardrobe Bars
- Drawer Slides
- Drip Edges, Caps & Flashing
- Fence Rails, Posts, Pickets & Stiffeners
- Din Rails, Bus Bars Wireways, Cable Trays, & Bus Ducts
- Heat Transfer Plates
- Scuff Plates, Roof Bows, & Hat Posts
- PVC Rail, Frame, Tubing & Pipe Stiffeners and Reinforcements
- Sink Mouldings, Grip Rims, & Prong Strips
- Security Storm Door Frames
- Stampings
- R.V. & Car Luggage Rack Tubing
- Mirror Frames
- Reflector Panels
- Snap-On Mouldings
- Storm Window & Screen Frames
- Handles
- Siding Trim
- Roll Up Slats
- Wall Studs & Partition Framing
- Sink Legs
- Industries Served
-
»
Resources & Links
- See Online Catalog
 
|
|
|
|
|
|
|
Caps, Covers, Cladding, Flashings
  Roll Formed Metal Caps & Covers go over other types of material and metal parts. They may even fit on other roll formed parts. A Snap-On or Slide-On fit can be achieved, if desired, according to customer preference. If a special fit is desired a wear proof quality gauge is made from a customer's mating material sample, after the part has been approved. Caps & Covers are used as Protectors, Seals, Tracks, Slides, Tops, Reflectors, Joints, decorative Trim and more. These parts are in both Straight and Ring form. Metals used are: Steel, Stainless, Aluminum, Brass, Copper, Alloys, Galvanized, Bronze, Clad, Perforated, & Wire Cloth. Prefinished metals are used often, such as: PrePainted, PrePlated, PrePolished, Specular, Strippable-PVC, PreLaminated Vinyl, Galvanized-(G30, G60, G90, G210, Electro, Bonderized), PreAnodized, PreLaquered and more. Material thicknesses range from .003" through .125" thick. Straight Lengths range from 4" through 40 feet and are cut to finished lengths or randoms. Rings range from 2.5" through 8 foot diameters. Inline operations, besides cutting to finished lengths, are: End Fabricating, Holes, Slots, Perforating, Ring Bending, Miters, Cutouts, K/O's. Other Materials can be inserted into Caps & Covers as well as double sided tape applied. There is existing tooling for many styles of Caps & Covers and new tooling that can be made for any not shown in our print examples.
Roll Formed Cladding are metal Profiles that function similarly to covers and caps but they most often have a thinner wall thickness. Cladding is typically PreFinished and used as a Protectant and as a Decorative Cover that encases an exposed material, wood or metal. It can be used in outdoor construction related products or in other industries. Cladding can also be a term for a Precoated Vinyl layer that is placed over metal prior to Roll Forming that again is decorative and a protectant. Cladding is not to be confused with Clad Metals. Clad Metal is when two types of metal are layered and bonded together prior to roll forming or joined together during roll forming. Clad Metals can be used to make Cladding but Clad Metal should not be termed as Cladding. All metals and PreFinishes, that are used for Caps & Covers, above, can be used for Cladding. Cladding is most often used in Straight and Frame form, but can be made in ring form. The same inline operations, used in production of Caps& Covers above, are also used in Metal Cladding. Special, Customer desired, Snap-On or Slide-On fit, is available, as with Caps & Covers. Other materials can be inserted inline or double sided tape applied to Cladding. Tooling is typically made for each unique Cladding profile and may be donated with high enough volume.
Flashings are Roll Formed Metal Profiles, similar to Caps, Covers & Cladding but have a much more specific use. They are mainly used in roofing, masonry, door, window, gutters and other outdoor, construction related products. They are also used in many other industries as Covers, Caps, Joints, Shields, Drip Caps, Corners, & Protectors. Flashings are typically wider than they are high and like Fins are usually formed more on one side than the other. They are usually made from thinner material like Cladding. They can be simple such as L-Shapes or a Flat Strip with a returned Hem, acting as a Protected Edge, on one side. They can also be more a complex profile with multiple bends throughout the width and extensive shape forming on one edge. Materials and Prefinishes used, as well as inline fabricating, are the same as Caps, Covers & Cladding above. Flashings are most often used in straight form but can be made into Frames, with inline mitering, and Rings, with inline bending, if necessary. Some tooling exists for more simple styled flashings such as flat strips or L-shapes with Hems on one or both sides. More Complex Profiles, not shown in our print examples, typically requires new tooling. Tooling can be donated with high enough volume
|
|
|
|
|
|
|
|
